• IP network amplifier with audio decoder.
  • Simple system configuration by system server, paging microphone & IP network amplifier to set up IP audio system.
  • Huge system capacity of 6,000 zones paging and multiple BGM system.
  • IP based public address system over LAN/WAN or Internet.
  • Minimum cable connection by using existing network framework.
  • Non-dedicated network audio system solution.
  • Economy network PA system for multiple room and multiple program applications.
  • Ideal for school, office, restaurant and fitness center IP PA sound system.
  • IP network decoder built-in 100V/8 Ohm Amplifier.
  • Rated power output of 60W, 120W, 240W & 350W.
  • Three microphone inputs and two line inputs and one line output.
  • Enable to broadcast Mp3 program or pre-recorded voice message from PC server to IP amplifier.
  • Remote volume control and program control from server room.
  • Timely broadcast ring bell or pre-recorded message to pre-set zones.
  • IP remote paging microphone enables to talk to each speaker zone or amplifier over network.

Model IP-6060, IP-6120, IP-6240, IP-6350
Description IP Network   Amplifier
Rated Power   Output 60W, 120W, 240W, 350W
Protocol Support TCP/IP, UDP,   IGMP (group broadcasting)
Transmit Speed 10/100Mbps
Audio Format 16 digit stereo   CD tone
Frequency Response 20Hz~16KHz
THD ≤0.3%
S/N Ratio ≥85dB
Connector One RJ45 port,   three mic inputs and two line input and one line output
Speaker Output 100V/70V & 8   Ohm
Working   Temp -5℃ to +40℃
Humidity 10% ~ 90%
Power   Consumption 95W, 175W, 350W, 485W
Power Supply AC220V, 50-60Hz
Dimensions 484(W)x366(D)x88(H)mm