• Ideal solution for indoor two way intercom communication system in park, school, factory, train station and airport.
  • IP network intercom system very suitable for big scale installation system whether by CAT5 cable or fiber optical cable.
  • Aluminum finish with damage proof screw fixing up.
  • Both surface and embedded mounting ways with supplied mounting box.
  • Classic range high quality IP intercom panel.
  • The IP network Intercom slave station built-in 3W speaker and microphone.
  • Full duplex two way communication system.
  • It can start the communication to the call station by pressing the call button, the call station will be reminded with ring call and indicator as which intercom panel from where is calling. The call will be automatically transferred to next call station once busy, no answer or fault occurred.
  • With one contact output and contact input for third party communication.
  • Non dedicated network is needed, the system could be easily built-up over exiting LAN/WAN network.
  • Embedded server Lynux technology with two ARM and DSP high speech chip.
  • Max support 64,000 call stations working at the same time.
  • Start time less than 0.1 second.
  • Network data delay of less than 30 milliseconds.
  • It is POE supportable & also could be powered by DC12V.

Model IP-6-2
Description IP Network Intercom Slave Station
Mounting Support both surface or embedded by supplied mounting box
Power Supply POE or DC 12V
Power Consumption 5W
Network Protocol TCP, UDP, ARP, ICMP, IGMP
Network Speed 10/100Mbps
Audio Sampling 8KHz-44.1KHz, 16 bits
Transmission Rate 8Kbps to 320Kbps
S/N Ratio ≥90dB
Frequency Response 20Hz-20KHz
Data Delay 30 milliseconds
Built-in Speaker 3W
Connector One line output & one RJ45 port for LAN, one contact input and one contact output
Dimension 255(W)×115(D)×50(H)mm